Production of primary sheet metal in the continuous casting unit, reducing the thickness and width of the steel sheet by a large amount in the hot rolling unit and converting the steel sheet into sheets with a thickness of 1 to 7 mm and, if necessary, in the third stage of cold rolling of the sheets produced in Hot rolling in order to achieve sheets with much lower thickness and higher surface quality. Oiled sheet is a hot rolled product and has a different manufacturing process. In the rolling operation, they reduce the thickness of the sheet or change the cross section through the pressure forces applied by the rollers. converted, in this article we will specifically examine the method of producing all kinds of steel sheets. In general, regarding the steel sheet sector, it can be said that contrary to this issue, the limited supply of sponge iron and iron scrap during the last week may have led to an increase in the price of ingots, and with the increase in the price of ingots, we can expect that other steel products will also have an upward trend. However, due to the decrease in demand, we saw a decrease in the price of steel products and the price of steel sheet during the last week, and these factors led to a drop in the market during the week ending on January 15.

Metal sheets play a wide role in the domestic, semi-commercial, commercial and industrial sectors, and anyone who works with these sheets must deal with a combination of various models of these sheets. Although sheet metals have their uses and are known for their unique properties, there is no better definition for them than what has been said. From the technical point of view, metal sheets are known as metal sheets with a thickness of less than 6 mm. Stainless steel is mainly known for its high resistance to atmospheric exposure. For easy access to the price of Mobarake steel oil sheet, it is one of the most demanded sheets in the market. You can also use the link below. Another special feature of copper sheet metals is very high wear resistance. As a result, this piece has a very durable default quality.

Galvanized sheet is the base of this product when it is painted and primed, then it is placed in the furnace and is galvanized sheet price is converted. RC: The material of the covering layer is iron-zinc and the surface quality of these sheets is excellent and they can be painted. Therefore, after the process is finished, the sheet is acid washed. Acid washing sheets are produced from 1.5 mm to 6 mm thick and are usually produced in two forms, rolls and sheets (fabric and shear). After the production of the sheet in the hot rolling process, due to the high temperature of the steel ingot, the process of continuous spraying is done on its surface. This causes iron oxide to form on its surface, and now acid washing process must be done in order to remove the oxidized scales on the surface of the sheet. Before examining the types of steel sheets, including hot and cold sheets, you will read a little about the history of rolling and steel plates in Iran. Galvanized sheet is the raw material in the production of colored sheet.

Therefore, the stainless steel sheet has the property of protecting against acid, salt, rain, alkali, etc. In this method, the surface of oiled sheets is covered with a thin layer of zinc. There are many properties in copper sheet metals that make this type of part preferred for commercial and industrial purposes. Meanwhile, in the last days of the last week, again ;">The price of oiled sheet of this product has been increasing and in some cases these prices have stabilized and there were not many fluctuations in this sector. Therefore, it can be said that the change in the price fluctuations of steel sheet in the last days of last week and in the first day of this week promises the prosperity of this market. Therefore, during the last week, it was predicted that this downward trend for the price of steel products will not continue, and as we have seen, this trend changed on the first day of this week. It should be noted that zinc protects steel and iron against iron oxide. Oxin Steel of Khuzestan produces all kinds of wide steel sheets by using the world's modern technology and the latest technologies. The article introducing three widely used ribbed sheets also draws a complete picture of the three popular ribbed sheets in the market.

Acid washing sheet: It is a type of steel sheet that uses hydrochloric acid to remove all the fat and impurities from its surface. These sheets are not shiny and transparent like galvanized sheets, and the reason is that they add a kind of oxidation to the surface of the black sheets to be anti-rust, that's why it becomes matte. Regarding the production of these sheets, it should be said that due to the fact that they are produced and made by the hot rolling process, the sheets are first placed in furnaces with very high temperature and then they enter the production line and after entering the line Production of heated sheets is oxidized so that it is resistant to moisture, and then it is made into sheets by pressing machines with very high pressure. Like other metals, black sheet does not have a fixed price and is subject to fluctuations. ><strong>The price of black sheet</strong> is influenced by various factors. hot sheet except for pipe and profile use, for other uses with